|
|
| MBD-X8SIL-F -O | X8SIL-F (Standard Retail Pack) |
| MBD-X8SIL-F -B | X8SIL-F (Bulk Pack) |
| Form Factor | Micro ATX |
| Dimensions | 9.6" x 9.6" (24.4cm x 24.4cm) |
| CPU | LGA 1156 Socket |
| Intel Xeon X3400 series |
| Intel Xeon L3400 series |
| Intel Core™ i3 |
| Intel Pentium G6950 |
| Intel Celeron G1101 |
| Memory Capacity | 4x 240-pin DDR3 DIMM sockets |
| Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) |
| Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) |
| 1333 / 1066 / 800 MHz |
| Dual Core processors of Ci3 and Pentium: support ECC UDIMM only |
| Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements |
| Memory Type | 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
| Chipset | Intel 3420 chipset |
| SATA | 6x SATA (3 Gbps) |
| RAID 0, 1, 5, 10 support (Windows) |
| RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| Nuvoton WPCM450 BMC |
| Network Controllers | 2x Intel 82574L Gigabit Ethernet Controllers |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| 1x Realtek RTL8201N PHY (dedicated IPMI) |
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond 83627DHG-P |
| Clock Generator | CK505 |
| Serial ATA | 6 SATA ports |
| 6 SATA hard drives supported |
| LAN | 2x RJ45 LAN ports |
| 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB rear ports |
| 1x USB on-board |
| 2x USB internal header (4 ports) |
| Total 7 USB 2.0 Compliant |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| 1x internal header |
| RoHS Compliant 6/6, Pb Free |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) |
| Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5 to 95% (non-condensing) |
| PCI-Express | 2 (x8) PCI-E 2.0 slot |
| 1 (x4) PCI-E (using x8 slot) |
| PCI | 1 32-bit PCI slot |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 |
| PCI 2.2 |
| ACPI 1.0 / 2.0 |
| USB Keyboard support |
| SMBIOS 2.3 |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Super |
| Doctor III |
| Watch Dog |
| NMI |
| Power Configurations | ACPI / ACPM Power Management |
| Main Switch Override Mechanism |
| Wake-On-LAN (WOL) header |
| Keyboard Wakeup from Soft-Off |
| Power-on mode for AC power recovery |
| Internal/External modem ring-on |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of 5 fan headers supporting up to 5 fans |
| Five 4-pin fan headers |
| 5x fans with tachometer status monitoring |
| Status monitor for speed control |
| Status monitor for on/off control |
| Support 3-pin fans (w/o speed control) |
| Low noise fan speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| FC temperature sensing logic |
| Thermal Monitor 2 (TM2) support |
| PECI |
| LED | CPU / System Overheat LED |
| +5V Standby alert LED |
| Other Features | Chassis intrusion detection |
| Chassis intrusion header |
Total Review(s): 0
