| CPU |
1. Support for AM3/AM2+/AM2 processors: AMD Phenom™ II processor/ AMD Phenom™ processor/ AMD Athlon™ II processor/ AMD Athlon™ processor/ AMD Sempron™ processor |
| Hyper Transport Bus |
1. 5200/2000 MT/s |
| Chipset |
1. North Bridge: AMD 785G |
|
2. South Bridge: AMD SB710 |
| Memory |
1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1) |
|
2. Dual channel memory architecture |
|
3. Support for DDR2 1200 (OC)/1066(Note2)/800/667 MHz memory modules |
| Onboard Graphics |
Integrated in the North Bridge: |
|
1. 1 x D-Sub port |
|
2. 1 x DVI-D port (Note 3) (Note 4) |
|
3. 1 x HDMI port (Note 4) |
| Audio |
1. Realtek ALC889A codec |
|
2. High Definition Audio |
|
3. 2/4/5.1/7.1-channel |
|
4. Support for S/PDIF In/Out |
|
5. Support for CD In |
| LAN |
1. Realtek 8111C chip (10/100/1000 Mbit) |
| Expansion Slots |
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
|
(The PCI Express x16 slot conforms to PCI Express 2.0 standard.) |
|
2. 1 x PCI Express x1 slot |
|
3. 2 x PCI slots |
| Storage Interface |
South Bridge: |
|
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices |
|
2. 5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices |
|
3. 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s device |
|
4. Support for SATA RAID 0, RAID 1, RAID 10 and JBOD |
|
iTE IT8718 chip: |
|
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive |
| USB |
Integrated in the South Bridge |
|
1. Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets connected to the internal USB headers) |
| IEEE 1394 |
T.I. TSB43AB23 chip |
|
1. Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header) |
| Internal I/O Connectors |
1. 1 x 24-pin ATX main power connector |
|
2. 1 x 8-pin ATX 12V power connector |
|
3. 1 x floppy disk drive connector |
|
4. 1 x IDE connector |
|
5. 5 x SATA 3Gb/s connectors |
|
6. 1 x CPU fan header |
|
7. 1 x system fan header |
|
8. 1 x North Bridge fan header |
|
9. 1 x front panel header |
|
10. 1 x front panel audio header |
|
11. 1 x CD In connector |
|
12. 1 x S/PDIF In/Out header |
|
13. 3 x USB 2.0/1.1 headers |
|
14. 1 x IEEE 1394a header |
|
15. 1 x parallel port header |
|
16. 1 x serial port header |
|
17. 1 x chassis intrusion header |
|
18. 1 x power LED header |
|
19. 1 x clearing CMOS jumper |
| Back Panel Connectors |
1. 1 x PS/2 keyboard port or PS/2 mouse port |
|
2. 1 x D-Sub port |
|
3. 1 x DVI-D port (Note 3)(Note 4) |
|
4. 1 x HDMI port(Note 4) |
|
5. 1 x optical S/PDIF Out connector |
|
6. 1 x eSATA 3Gb/s port |
|
7. 1 x IEEE 1394a port |
|
8. 6 x USB 2.0/1.1 ports |
|
9. 1 x RJ-45 port |
|
10. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone) |
| I/O Controller |
1. ITE IT8718 chip |
| H/W Monitoring |
1. System voltage detection |
|
2. CPU/System temperature detection |
|
3. CPU/System fan speed detection |
|
4. CPU overheating warning |
|
5. CPU/System/Power fan fail warning |
|
6. CPU/System fan speed control (Note 5) |
| BIOS |
1. 2 x 8 Mbit flash |
|
2. Use of licensed AWARD BIOS |
|
3. Support for DualBIOS™ |
|
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b |
| Unique Features |
1. Support for @BIOS |
|
2. Support for Q-Flash |
|
3. Support for Xpress BIOS Rescue |
|
4. Support for Download Center |
|
5. Support for Xpress Install |
|
6. Support for Xpress Recovery2 |
|
7. Support for EasyTune (Note 6) |
|
8. Support for Easy Energy Saver (Note 7) |
|
9. Support for Time Repare |
|
10. Support for Q-Share |
| Bundle Software |
1. Norton Internet Security (OEM version) |
| Operating System |
1. Support for Microsoft Windows Vista/ XP |
| Form Factor |
1. Micro ATX Form Factor; 24.3cm x 24.3cm |
| Note |
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. |
|
(Note 2) Whether 1066 MHz or above memory speed is supported depends on the CPU being used. |
|
(Note 3) The DVI-D port does not support D-Sub connection by adapter. |
|
(Note 4) Simultaneous output for DVI-D and HDMI is not supported. |
|
(Note 5) Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. |
|
(Note 6) Available functions in EasyTune may differ by motherboard model. |
|
(Note 7) Due to the hardware limitation, you must install the AMD AM3/ AM2+ Series CPU to enable support for Easy Energy Saver. |
| Remark |
1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. |
|
2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website. |
| |
|
More Info
