(Project-based) Supermicro X11DPT-BH Proprietary Server Board - for select Server (X11DPT-BH) *Speical-Order, Proprietary Board - No Cancellation, No return, No Exchange !!
(Project-based) Supermicro X11DPT-BH Proprietary Server Board - for select Server (X11DPT-BH) *Speical-Order, Proprietary Board - No Cancellation, No return, No Exchange !!
Returns are only accepted for defective items; all other sales are final.
Delivery times may vary. You will be notified once your order is ready to ship.
Custom order products cannot be canceled once the order is placed.
*Special-Order, Proprietary Board - AbsolutelyNo Cancellation, No Return, No Exchange !!
If you purchase this Proprietary Board to service your select Server, and not solve your defective issue, there is likely other issues on your server. You keep this Board !
Total of 6 fan headers supporting up to 6 fans <br/>6 fans with tachometer status monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Low noise fan speed control <br/>Pulse Width Modulated (PWM) fan connectors
Form Factor
ATX
Graphics
ASPEED AST2400 BMC
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
IPMI
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>ASPEED AST2400 BMC
LAN
2x RJ45 Gigabit Ethernet LAN ports <br/>1x RJ45 Dedicated IPMI LAN port
LED
CPU / System Overheat LED <br/>Suspend static indicator LED <br/>UID/Remote UID
Memory Capacity
8x 288-pin DDR4 DIMM slots <br/>Up to 1TB ECC 3DS LRDIMM <br/>Up to 512GB ECC LRDIMM <br/>Up to 256GB ECC RDIMM
Intel® i210 Dual Port Gigabit Ethernet <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Non-Operating Relative Humidity Range
10% ~ 95% (non-condensing)
Non-Operating Temperature Range
20°C ~ 60°C (-4°F ~ 140°F)
Note
** Motherboard supports this maximum TDP. Please verify your system can thermally support. <br/>** E5-1600 series CPU does not support LRDIMM type memory
2x PCI-E 3.0 x8 (in x16) slots <br/>2x PCI-E 3.0 x8 slots <br/>2x PCI-E 3.0 x4 (in x8) slots Auto-switch to 1 x8 and 1 x0 <br/>1x PCI-E 2.0 x4 (in x8) slot
Power Configurations
ACPI Power Management <br/>Keyboard Wakeup from Soft-Off <br/>CPU Fan auto-off in sleep mode <br/>Power-on mode for AC power recovery
SATA
10x SATA3 (6Gbps) ports
Serial Port / Header
1x serial port, 1x header
Software
Intel® Node Manager <br/>IPMI 2.0 with KVM support <br/>SuperDoctor® 5 <br/>Watch Dog <br/>NMI <br/>SPM <br/>SUM
SuperDOM
2x SuperDOM (Disk on Module) ports with built-in power
Temperature
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>I2C temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI
TPM
1x TPM Header
USB
4x USB 3.0 ports (2 rear + 1 via header + 1 Type A) <br/>8x USB 2.0 ports (2 rear + 6 via header)
Video
1 x VGA Port
Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
Total of 6 fan headers supporting up to 6 fans <br/>6 fans with tachometer status monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Low noise fan speed control <br/>Pulse Width Modulated (PWM) fan connectors
Form Factor
ATX
Graphics
ASPEED AST2400 BMC
Important Chassis Notes
To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
IPMI
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>ASPEED AST2400 BMC
LAN
2x RJ45 Gigabit Ethernet LAN ports <br/>1x RJ45 Dedicated IPMI LAN port
LED
CPU / System Overheat LED <br/>Suspend static indicator LED <br/>UID/Remote UID
Memory Capacity
8x 288-pin DDR4 DIMM slots <br/>Up to 1TB ECC 3DS LRDIMM <br/>Up to 512GB ECC LRDIMM <br/>Up to 256GB ECC RDIMM
Intel® i210 Dual Port Gigabit Ethernet <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Non-Operating Relative Humidity Range
10% ~ 95% (non-condensing)
Non-Operating Temperature Range
20°C ~ 60°C (-4°F ~ 140°F)
Note
** Motherboard supports this maximum TDP. Please verify your system can thermally support. <br/>** E5-1600 series CPU does not support LRDIMM type memory
2x PCI-E 3.0 x8 (in x16) slots <br/>2x PCI-E 3.0 x8 slots <br/>2x PCI-E 3.0 x4 (in x8) slots Auto-switch to 1 x8 and 1 x0 <br/>1x PCI-E 2.0 x4 (in x8) slot
Power Configurations
ACPI Power Management <br/>Keyboard Wakeup from Soft-Off <br/>CPU Fan auto-off in sleep mode <br/>Power-on mode for AC power recovery
SATA
10x SATA3 (6Gbps) ports
Serial Port / Header
1x serial port, 1x header
Software
Intel® Node Manager <br/>IPMI 2.0 with KVM support <br/>SuperDoctor® 5 <br/>Watch Dog <br/>NMI <br/>SPM <br/>SUM
SuperDOM
2x SuperDOM (Disk on Module) ports with built-in power
Temperature
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>I2C temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI
TPM
1x TPM Header
USB
4x USB 3.0 ports (2 rear + 1 via header + 1 Type A) <br/>8x USB 2.0 ports (2 rear + 6 via header)
Video
1 x VGA Port
Voltage
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
Defective Exchange Period
30 Days
Defective Exchange Period
30 Days
For Quebec Residents – Disclosure under the Consumer Protection Act
In accordance with Bill 29, Canada Computers does not guarantee the availability of replacement parts, repair services, or maintenance information for any products. Coverage provided under any Canada Computers Tech Care Plans and applicable manufacturer warranties, if any, remains unaffected. For information regarding a manufacturer’s availability guarantee, please contact the manufacturer directly.