|
Brand |
SUPERMICRO |
|
Model |
CSE-815TQC-R504WB |
|
CPU |
Single Socket H4 (LGA 1151) supports: <br/>Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3, Intel® Pentium®, Intel® Celeron® processors <br/>CPU TDP up to 80W |
|
Memory Capacity |
4x 288-pin DDR4 DIMM slots <br/>Up to 64GB DDR4 ECC UDIMM |
|
Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
|
Motherboard |
Super X11SSW-F |
|
Manufacturer Part Number |
SYS-5019S-WR |
|
Backplane |
SAS/SATA HDD Backplane <br/>(SAS support requires optional SAS controller) |
|
Power Supply with Power Distributor |
500W high-efficiency (94+%) power supply w/ PMBus |
|
Available Colours |
Black |
|
BIOS Features |
DMI 2.3 <br/>PCI 2.3 <br/>ACPI 1.0 / 2.0 <br/>USB Keyboard support <br/>SMBIOS 2.3 |
|
BIOS Type |
8MB SPI Flash EEPROM with AMI BIOS |
|
Buttons |
Power On/Off button <br/>System Reset button |
|
Certification |
80 Plus Platinum |
|
Chipset |
Intel® C236 chipset |
|
Dimensions (D x W x H) |
25.6 x 17.2 x 1.7" (65 x 43.7 x 43 cm) |
|
DIMM Sizes |
16GB, 8GB, 4GB |
|
Environmental Spec. |
Operating Temperature: <br/>10°C to 35°C (50°F to 95°F) <br/>Non-operating Temperature: <br/>-40°C to 70°C (-40°F to 158°F) <br/>Operating Relative Humidity: <br/>8% to 90% (non-condensing) <br/>Non-operating Relative Humidity: <br/>5% to 95% (non-condensing) |
|
Error Detection |
Corrects single-bit errors <br/>Detects double-bit errors (using ECC memory) |
|
Fan |
Total of 6 fan headers supporting up to 6 fans <br/>3 fans with tachometer status monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Low noise fan speed control <br/>Pulse Width Modulated (PWM) fan connectors |
|
Fans |
4x 4cm chassis internal fans |
|
Form Factor |
1U Rackmount |
|
Hot-swap |
4 Hot-swap 3.5" SATA3 drive bays |
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>ASPEED AST2400 BMC |
|
LAN |
2 RJ45 Gigabit Ethernet LAN ports <br/>1 RJ45 Dedicated IPMI LAN port |
|
LED |
CPU / System Overheat LED <br/>Suspend static indicator LED <br/>UID/Remote UID |
|
LEDs |
Power LED <br/>Hard drive activity LED <br/>Network activity LEDs <br/>System Overheat LED <br/>Information LED (temp., status) |
|
Memory Voltage |
1.2 V |
|
Network Controllers |
Dual Intel® I210-AT Gigabit Ethernet LAN ports <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Note |
BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors |
|
Optional |
Optional 2.5" drive adapter <br/>Optional slim DVD drive |
|
Other Features |
Chassis intrusion detection <br/>Chassis intrusion header <br/>Chipkill support <br/>RoHS, Halogen Free |
|
PCI-Express |
2 PCI-E 3.0 x8 AOC slots <br/>1 PCI-E 3.0 x4 (in x8) AOC slot <br/>1 M.2 connector |
|
RoHS |
RoHS Compliant |
|
SATA |
4 SATA3 (6Gbps) ports |
|
Serial Port / Header |
1 COM ports (1 rear) |
|
SuperDOM |
2 SuperDOM (Disk on Module) ports with built-in power |
|
Temperature |
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>I2C temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI |
|
USB |
2 USB 3.0 ports (rear) <br/>2 USB 2.0 ports (rear) |
|
Video |
1 VGA port |
|
Voltage |
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
|
With Power Distributor |
+5V: 25 Amp <br/>+3.3V: 12 Amp <br/>-12V: 0.6 Amp |