|
Brand |
SUPERMICRO |
|
Model |
CSE-218G-R1800B |
|
CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. <br/>CPU Core 6-Phase-switching voltage regulator |
|
Memory Capacity |
8x 240-pin DDR3 DIMM slots <br/>Up to 512GB DDR3 ECC LRDIMM <br/>Up to 256GB DDR3 ECC Registered memory (RDIMM) <br/>Up to 48GB DDR3 ECC and non-ECC UDIMM |
|
Memory Type |
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
Motherboard |
Super X9DRG-HF |
|
Manufacturer Part Number |
SYS-2027GR-TRF |
|
Power Supply |
1800W (1+1) Redundant 1800W power supply with PMBus |
|
AC Input |
1000W Output @ 100-120V, 12-10A, 50-60Hz <br/>1200W Output @ 120-140V, 12-10A, 50-60Hz <br/>1800W Output @ 200-240V, 10-8.5A, 50-60Hz |
|
AHCI SATA |
SATA 2.0 3Gbps with RAID 0, 1, 5, 10 <br/>SATA 3.0 6Gbps with RAID 0, 1 |
|
Available Colours |
Black |
|
BIOS Features |
Plug and Play (PnP) <br/>APM 1.2 <br/>DMI 2.3 <br/>PCI 2.2 <br/>ACPI 1.0 / 2.0 <br/>USB Keyboard support <br/>Hardware BIOS Virus protection <br/>SMBIOS 2.3 UEFI <br/>RTC (Real Time Clock) Wakeup |
|
BIOS Type |
128Mb SPI Flash EEPROM with AMI® BIOS |
|
Buttons |
Power On/Off button <br/>System Reset button |
|
Certification |
Platinum Certified |
|
Chipset |
Intel® C602 Chipset |
|
Cores / Cache |
Up to 30MB |
|
DC Output |
1000W: +12V/84A; +5Vsb/4A <br/>1200W: +12V/100A; +5Vsb/4A <br/>1800W: +12V/150A; +5Vsb/4A |
|
Dimensions (D x W x H) |
31 x 17.2 x 1.7" (78.7 x 43.7 x 4.3 cm) |
|
DIMM Sizes |
32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
|
Environmental Spec. |
Operating Temperature: <br/>10°C to 35°C (50°F to 95°F) <br/>Non-operating Temperature: <br/>-40°C to 70°C (-40°F to 158°F) <br/>Operating Relative Humidity: <br/>8% to 90% (non-condensing) <br/>Non-operating Relative Humidity: <br/>5% to 95% (non-condensing) |
|
Error Detection |
Corrects single-bit errors <br/>Detects double-bit errors (using ECC memory) |
|
Fan |
Total of five 4-pin PWM fans <br/>5x fans with tachometer monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Low noise fan speed control |
|
Fans |
5x 8cm heavy duty fans with optimal fan speed control |
|
Form Factor |
2U Rackmount |
|
GPU/Xeon Phi Support |
M2090/M2075, up to 130W CPU at 35°C <br/>K10/K20/K20X/K1/K2/K40M (Kepler), up to 130W CPU at 35°C <br/>Xeon Phi 5110P, up to 130W CPU at 35°C |
|
Graphics |
Matrox G200eW |
|
Hot-swap |
10x 2.5" Hot-swap drive bays |
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>Nuvoton WPCM450 BMC |
|
Keyboard/Mouse |
1 PS/2 Keyboard/Mouse port |
|
LAN |
2 RJ45 Gigabit Ethernet LAN ports <br/>1 RJ45 Dedicated IPMI LAN port |
|
LED |
Power Fail / Overheat LED <br/>Suspend-state Indicator LED UID LED |
|
LEDs |
Power LED <br/>Hard drive activity LED <br/>2x Network activity LEDs <br/>System Overheat LED / Fan fail LED / UID LED |
|
Memory Voltage |
1.5 V, 1.35 V |
|
Network Controllers |
Intel® i350 Dual Port Gigabit Ethernet <br/>Virtual Machine Device Queues reduce I/O overhead <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output <br/>1x Realtek RTL8201N PHY (dedicated IPMI) <br/>(Both CPUs need to be installed for LAN ports 1 and 2 to be enabled) |
|
Other Features |
SDDC Support |
|
PCI-Express |
4x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, option) <br/>1x PCI-E 3.0 x8 (in x16) low-profile slot <br/>1x PCI-E 2.0 x4 (in x16) slot |
|
RoHS |
RoHS Compliant |
|
SATA |
2 SATA 3.0 ports (6Gbps) <br/>8 SATA 2.0 ports (3Gbps) |
|
Serial Port |
1 Serial header |
|
System Bus |
QPI up to 8 GT/s |
|
Temperature |
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>Thermal Control for 10x Fan Connectors <br/>PSU I2C temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI |
|
USB |
2 USB 2.0 ports |
|
Video |
1 VGA Connector |