|
Brand |
SUPERMICRO |
|
Model |
CSE-827H-R1400B |
|
CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. <br/>CPU Core 6-Phase-switching voltage regulator |
|
Memory Capacity |
12x 240-pin DIMM slots <br/>Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory <br/>Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory <br/>Memory Mirroring supported |
|
Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
Motherboard |
4x Super X8DTT-HF+ |
|
Manufacturer Part Number |
SYS-6016T-NTRF |
|
Backplane |
2U Hard drive Backplane |
|
Power Supply |
1400W high-efficiency (1+1) redundant power supply with PMBus |
|
AC Input |
1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz <br/>1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz |
|
Available Colours |
Black |
|
BIOS Features |
Plug and Play (PnP) <br/>PCI 2.2 <br/>ACPI up to 3.0 <br/>USB Keyboard support |
|
BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
|
Buttons |
Power On/Off button <br/>UID button |
|
Certification |
Gold Certified |
|
Chipset |
Intel® 5500 (Tylersburg) chipset ICH10R + IOH-36D |
|
Clock Generator |
932S421 chip |
|
DC Output |
1100W: +12V/92A; +5Vsb/4A <br/>1400W: +12V/116A; +5Vsb/4A |
|
Dimensions (D x W x H) |
28.5 x 17.2 x 3.5" (72.4 x 43.7 x 8.9 cm) |
|
DIMM Sizes |
1GB, 2GB, 4GB , 8GB , 16GB |
|
Environmental Spec. |
Operating Temperature: <br/>10°C to 35°C (50°F to 95°F) <br/>Non-operating Temperature: <br/>-40°C to 70°C (-40°F to 158°F) <br/>Operating Relative Humidity: <br/>8% to 90% (non-condensing) <br/>Non-operating Relative Humidity: <br/>5% to 95% (non-condensing) |
|
Error Detection |
Corrects single-bit errors <br/>Detects double-bit errors (using ECC memory) <br/>Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
Fan |
Total of four 4-pin PWM fans <br/>4x fans with tachometer monitoring <br/>Status monitor for speed control <br/>Status monitor for on/off control <br/>Low noise fan speed control |
|
Fans |
4x Cooling Fans |
|
Form Factor |
2U Rackmount |
|
Graphics |
Matrox G200eW |
|
Hot-swap |
3x 3.5" SATA Hot-swap drive bays |
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 <br/>IPMI 2.0 with virtual media over LAN and KVM-over-LAN support <br/>Nuvoton WPCM450 BMC |
|
LAN |
2x RJ45 LAN ports <br/>1x RJ45 Dedicated IPMI LAN port |
|
LED |
Power Fail / Overheat LED <br/>Suspend-state Indicator LED <br/>UID LED |
|
LEDs |
Power LED (on power button) <br/>Network activity LED <br/>System Overheat/fan fail/power fail/ LED <br/>UID LED (on UID button) |
|
Memory Voltage |
1.5 V, 1.35 V |
|
Network Controllers |
Dual Intel® 82574L Gigabit Ethernet Controller <br/>Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output <br/>1x Realtek RTL8201N PHY (dedicated IPMI) |
|
Other Features |
SDDC Support |
|
PCI-Express |
1 (x16) PCI-E ( Low Profile) |
|
RoHS |
RoHS Compliant |
|
SATA |
Intel ICH10R SATA 3.0Gbps Controller <br/>RAID 0, 1, 5, 10 support (Windows) <br/>RAID 0, 1, 10 support (Linux) |
|
Serial ATA |
Six Serial ATA ports <br/>3 SATA hard drives supported |
|
Serial Port |
1 Fast UART 16550 serial port |
|
Super I/O |
Winbond W83527HG chip |
|
System Bus |
up to 6.4 GT/s |
|
Temperature |
Monitoring for CPU and chassis environment <br/>CPU thermal trip support <br/>Thermal Control for 4x Fan Connectors <br/>PSU I2C temperature sensing logic <br/>Thermal Monitor 2 (TM2) support <br/>PECI |
|
USB |
2 rear + 1 header (2 Ports) <br/>4 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
VGA |
1 x VGA Port |
|
With Power Distributor |
+5V: 30 Amp <br/>+3.3V: 24 Amp <br/>-12V: 0.6 Amp |